ONE PART EPOXY POOL PAINT

ArmorGarage Ultra Epoxy 1 part pool paint requires no mixing or priming. Simple application makes your pool look brand new!

Solventless coating can be applied over any chlorinated rubber and synthetic rubber coatings. VOC compliant in all 50 states.

Easy to clean, semi-gloss, stain resistant finish. Up to four years of service life before recoating needed. For longer life, see our two-part epoxy pool paint.

Coverage is 300 square feet/gallon per coat (two coats required). Can be used on most coated surfaces except epoxy pool paints and Jacuzzis/spas, concrete or fiberglass. (use the 2 Part Pool paint for these applications).

Available in White, Dawn Blue and Black. Can be used with commercially available Skid Tex non skid additive on areas such as steps and areas where slippage could be of concern. Simply disperse Skd Tex into first coat and let dry. Remove any loose Skid Tex and apply the second required coat. You now have a slip resistant finish.

To figure square footage of your pool use this formula: (L x W) + (L x Avg Depth x 2) + (W x Shallow Depth) + (W x Deep Depth).
EXAMPLE 25 x 40 pool with 4' to 10 depth: 25 x40 + (40 x 7 x2) + (25 x 4) + (25 x 10)= 1910 sf.

ArmorGarage one part pool paint carries a One year warranty.

Please note lead times during Spring/Summer maybe 3-5 business days plus transit time from East Coast.

Please note that the application procedure is the same as the two part epoxy except that this is a one part product the requires no mixing of a Part A & Part B.

Do not apply over a previous coating of an epoxy two part paint.

ARMORGARAGE TWO PART EPOXY POOL INSTRUCTIONS