Armor Shingle Roof Coating:
The Best Roof Coating for Shingles on the Market


Stop your asphalt shingle roof leaks!

Armor Shingle Roof Coating is the best one part sealer that penetrates and forms a protective coating that extends the life of old asphalt roof shingles.
Easily applied. Save thousands on a roof replacement!

Saving your old asphalt shingled roof doesn't get any easier or better than this! Simply clean all dirt, mold and mildew off, stir contents in can, then roller on or use a hand pumped sprayer to apply our roof coating for asphalt shingles. Let the first coat dry for 3-4 hours and then apply the second coat.

Two coats are recommended since most asphalt shingled roofs that need to be coated are porous and worn out and will tend to absorb the first coat, while the second coat leaves a protective surface film that stops shingle granule loss, cracking, curling and leaking.

Our asphalt shingle sealer can also be used to seal all microscopic cracks in clay roof tiles to stop leakage and extend useful life. The Armor Shingle Roof Coating is guaranteed against material defects for 5 years.

Armor Shingle Roof Coating provides a unique breathable shingle roof coating that allows moisture vapor to pass through the coat while remaining impervious to water penetration.

Our products are sold in five gallon buckets. Each five gallon bucket covers 1250 sq ft. Our asphalt shingle coating has been formulated with a bluish tint when wet so that you can see exactly where it's been applied. Once it's dry, it turns crystal clear and in no way obscures the beauty of your shingled roof. Applying clear coatings from the get-go makes it easy to miss spots. With our bluish tint, you are assured of a complete seamless roof coating!


I will finish my shingle coating project tomorrow. Here are my findings below with my thanks for a GREAT PRODUCT!

  • Blue tint when wet is an awesome indicator of where you left off (saves time and product)
  • Product spreads easily with no fumes
  • Two coat application really locks down granules (when first coated them they were loose, the next day bonded)
  • I can't over emphasize the importance of cleaning (surface preparation)
  • No priming

I've used many coatings in my day and most were fair to mediocre, you usually know how and IF they will work within hours of application, I could tell yours worked right out of the gate.

Robert Camacho

This coating is recommended for asphalt shingles, wood shingles, and tile roofs. For commercial type flat roofs see our solid colored rubber commercial roof coating Armor Roof Shield.

Below are a few pictures of our product in action. Take note of the way it helps you see where you've applied the shingle roof coating. Also, notice the way it leaves no trace once it's dry and the project is finished.

For the best results, take note of the following tips:

Apply down to 45 degrees. Fix any broken or missing shingles. Use a paintable acrylic caulk for large cracks or paintable roof repair tape. Do not apply to moist or wet roofs or if rain is forecasted within 24 hours of application. Please note that Armor Shingle Coating will not stop leaks from poorly or improperly installed shingles and flashings or from improperly pitched roofs. These are structural defects that no coating can solve.


Will this stop leaks for ice damning? No this coating is not designed to cure that, in fact we know of no shingle coating that is.

Wind will sometimes blow rain underneath the tiles, will this stop that from happening? No that is a shingle and installation issue that cannot be corrected via a coating.

Our roof was not pitched properly will the coating prevent leaks from happening? No. Armor Shingle Roof Coating cannot correct structural, installation or faulty tile issues.

How long will your shingle roof coating last? It is designed to last 7-10 years. At which time we recommend application of another coat.

How long will this extend the life of my shingles? Depending on the quality, age and condition of the tiles when you apply the coating it can extend the life cycle of up to 10 years.

What is the main purpose of this coating? The coating is designed to seal leaks in shingles due to old age, to prevent further loss of the granules, to restore some of the faded color back to your shingles and to preserve the shingles from further deterioration.