ARMOR NOVOLAC ACID PROOF EPOXIES AND COMPOUNDS

To help you in the proper selection we have put together a full Chemical & Acid Resistance Guide with over 300 listed chemicals and acids. Purchasing an acid & chemical resistant epoxy floor coating without knowing the duration of exposure to a chemical or acid that your coating can withstand is a guaranteed waste of your time and money.

This guide will provide you with the amount of resistance each of our products have to each chemical and acid, whether it's short term exposure, long term immersion or not suitable. Please check this guide and familiarize yourself with it and other critical factors such as Solids Percentage, Shore D Hardness and Abrasion Loss Ratings before purchasing any acid resistant Epoxy Floor system, including ours! Our website is geared to offer you the most information and expertise of any other website in the industry so that you know exactly what you are buying and why. This is even more important when doing floors exposed to acids and or chemicals. Purchasing product based simply on name or price and not knowing what the specifications of a product are and what they mean will result in ending up with an inferior epoxy coating unequal to the task and eventual failure.

Typical Uses: Unlike many other manufacturers that offer only a single coat product our Acid Resistant Epoxy System is a two layer system for the highest protection in acid containment areas, acid spill areas, acid & chemical drum storage areas, acid troughs, caustic wash down areas and battery recharging rooms. Our coatings are also designed to withstand high levels of traffic both wheeled and foot. If you do not see your application/chemical referenced in our guide please call us and we'll have one of our chemists review the suitability of our products for your application.

BRIEF PRODUCT DESCRIPTIONS:

AG253-257 is a Novolac primer and epoxy system that is resistant to hundreds of different acids, chemicals,waterproof and food safe. Available in 3 colors. 96% solids, 23 Mils thick, Shore D Hardness rating of 88 which is an extremely hard finish and a Compressive Strength of 9,900 PSI(stronger than concrete)making it very abrasion and impact resistant! Suitable for Forklift traffic, heavy foot or cart traffic, dropped parts and tools. Sold as a complete acid resistant system of epoxy primer and epoxy topcoat.

AG256-258 is a Novolac primer and epoxy system that comes in clear only. 97% solids, 23 Mils thick, Shore D Hardness rating of 82 and a Compressive Strength of 9,440 PSI!(stronger than concrete) This is also sold as a two step system as above. NOT RECOMMENDED FOR FORKLIFT OR HEAVY VEHICLE VEHICLE TRAFFIC.

AG501 is a thermal shock and acid resistant cement. Applied at 1/8"-3/16" with gauge rakes. Indestructible nonslip epoxy finish.

AG254 is an acid resistant crack filler

AG929 is a Novolac flexible joint filler where acid resistance is need for expansion joints in acid spill areas.