FAST SET CONCRETE CRACK & DIVOT REPAIR

FAST SET CONCRETE CRACK & DIVOT REPAIR

$349.00
Size: 
Quantity
FAST SETTING CRACK REPAIR PRODUCT. READY FOR HEAVY FORKLIFT TRAFFIC IN 1 HOUR. CAN BE APPLIED DOWN TO 20 DEGREES!

Amazing new product fixes cracks, repairs, spalls and small area concrete damage. Mix 1:1 and then immediately pour into area to be repaired. Aggregate such as sand should be used to give additional body and thickness. Color changes with addition of aggregate. This product is clear if used as a standalone filler. It will dry super hard, three times stronger than concrete. Perfect for factory and production floors where downtime is just not possible, lets you make repairs on the go!

Please note that this product has a VERY short working time, around 1-3 minutes when mixed with aggregate. Ensure to not mix Part A and Part B until ready to be applied and only mix enough material that will be used immediately. You can mix as little or as much as needed, just maintain the mix proper mix ratio, use of clear calibrated containers is trongly recommended.

2 gal set fills 462 cubic inches, or about 150 lineal feet of a 1/2″ wide by 1/2″ deep crack.

Cure Schedule

  • Pot Life (Working Time) – 1-3 Minutes


  • Recoat of Topcoat – 1 Hour


  • Light Foot Traffic – 15-20 Minutes


  • Full Cure (Heavy Forklift Traffic) – 1 Hour


  • *Dry times will vary based on application temperature. Application temperatures 20-90 degrees F.