Outdoor Textured Epoxy Coating For Any Surface!
Use this kit to epoxy coat any outdoor or indoor surface. Convert old worn out slippery tiles to a new slip free textured surface. Available in smooth finish also. Bonds to wood, any kind of tile, metal or plastic. Complete with one gallon special bonding primer, two gallons of outdoor UV rated Coating for two coats, mixer, rollers, instructions and Free Shipping. Coverage may vary depending on surface being coated. No Topcoat is necessary with this product! Not rated for vehicle traffic.
APPLICATION: Surface must be completely clean and dry. For best results de-gloss surface with sand paper or carbide sandpaper for ceramic tiles. Mix primer in can and roller on an even coat. Allow to dry approx 3 hours or till dry to the touch. Mix Coating thoroughly in can till color is even and streak free. Roller on an even coating and let dry to the touch then roll on a second coat perpendicular to first coat if possible. Pot life is approximately 45 minutes which is more then plenty of time to roll out one gallon. Do not leave open can in direct sunlight as this will heat product up and shorten pot life. Allow to dry for 24 hrs for best results.
Please note that we do not recommend using the smooth version for outdoor use. If using the outdoor smooth version it can be slippery when wet and we suggest using the non slip additive. For indoor use see the Indoor Kit link below.